
Click Photo to View Larger Image |
2000 AMP Electric Service:
This three phase, 2000 amp electric service was designed to
allow for future demand in each metered tenant space. Although
presently fused at 100 amps, each meter position is capable of
providing 200 amps of power to each tenant. Over sized conduits
were run to each unit to facilitate larger conductors. Planning
for future expansion placed few limits on potential buyers of
these units weather they be used for storage or industry. The
developer opted to use Square-D equipment and copper conductors
to insure continued reliability.
|

Click Photo to View Larger Image |
30,000 sq. ft. Warehouse Building:
When the developer contracted Integrated Electric for this
building, there were no electrical plans. Integrated Electric
provided design/build services for the entire building. The
building consists of 20 units, each with a total 1500 square
feet, including a rest room, and office space. Integrated
Electric completed the entire project ahead of schedule, in
three short months with a crew of five men.
|

Click Photo to View Larger Image |
12,000 sq. ft. Body shop at Attleboro Collision Center:
When the owner of Attleboro Collision wanted to expand
to a larger building, he called on Integrated Electric to assist
in designing the electrical system. This state-of-the-art
facility was custom built from the ground up with no electrical
drawings. The electrical system was designed around an 800 AMP,
three-phase service. The building houses two spray booths,
multiple frame machines, two compressors, a paint mixing room,
and 3,200 square feet of office space over two floors.
Integrated Electric installed high output, energy efficient
lighting throughout the building, qualifying the owner for
rebates from the power company. The owner requested the use of
copper wiring and Square-D distribution equipment.
|

Click Photo to View Larger Image |
New
England
Pottery Conveyor System:
New England Pottery needed to install a conveyor system
to efficiently move products through their massive 490,000
square foot warehouse. Initially, a 300 foot conveyor was
installed with another being delivered this year. A large
shrink-wrap oven was installed along with the first conveyor.
Each conveyor operates at 480 volts, draws close to 40 AMPS and
employs the use of several controls and switches. New
England Pottery continues to rely on Integrated Electric to
service their two facilities in Massachusetts.
|

Click Photo to View Larger Image |
Industrial Service and Engineering:
Don’t let the size of this 7,000 square-foot building fool you.
Industrial Services and Engineering’s new headquarters
contains a modern forensic laboratory. After providing ISE with
expert electrical investigation services for years, Integrated
Electric was chosen to wire their new facility. Working closely
with the owner and employees, Integrated Electric designed an
electrical system that allows ISE to test a multitude of
equipment from appliances to electrical panels for the insurance
industry. A three phase service was installed to allow for motor
and industrial equipment testing.
|
|
|
|
|
|
|